Mozztronics JD-1 JFET Drive

Mozztronics JD-1 JFET Drive Pedal
Three-stage Class A JFET circuit. No diode clipping. Smooth compressive dirt. Emulates a low-wattage amp. Hand made in Australia.
 
Want something a bit different to diode clipping overdrives? The Mozztronics JD-1 JFET Drive is the answer. The JFET is a type of transistor that operates in a similar way to a vacuum tube.
 
The Mozztronics JD-1 JFET Drive operates in pure Class A, using three stages of JFET goodness to accurately simulate an entire low wattage amp. There are no diodes in the audio signal path, and no diode clipping in this unit—just nice smooth JFET compressive dirt and overdrive.
 
This is great for crunch rhythm tones, and gives nice drive sounds when driven hard. It works great in combination with the TD-1 Tube Driver for a really smooth lead sound.
 
Suggested setup: Use the JD-1 before the TD-1 Tube Driver or EX-1 Expandrive in the signal chain. Set the JD-1 for crunch rhythm, and the TD-1 or EX-1 for lead. But there are no hard and fast rules—experiment with the order of your effects to find what you like.
 
Hand made in Melbourne, Australia by Mozztronics.
In stock at Guitar Garage Sydney. Ships Australia-wide.
 
Controls
GAIN – amount of gain from the first stage
TONE – controls treble in the output (from cut to boost)
VOLUME – overall output level
 
Key Features
Three-stage JFET circuit operating in pure Class A
JFET transistor behaves similarly to vacuum tube
No diodes in audio signal path
No diode clipping—smooth JFET compressive dirt
Emulates an entire low-wattage amplifier
Great for crunch rhythm tones
Nice drive sounds when driven hard
Pairs well with TD-1 Tube Driver or EX-1 Expandrive
TONE control from treble cut to treble boost
Hand made in Australia
 
Specifications
Circuit- 3-stage Class A JFETClippingNone (JFET compression only)
TONE- RangeTreble cut to treble boost
PowerStandard- 9V DC (Boss-style 2.1mm centre negative)
Construction- Hand made in Melbourne, Australia